Skillshare – 3D Modeling For 3D Printing And Laser Cutting on Fusion 360 – 1/4

In this series of four courses I will teach you how to design and model for 3D Printing and Laser Cutting using the free and powerful Autodesk Fusion 360 software. Most of the lessons are easy to follow practical examples where I take you through the design of a product step by step.

The course consists of 4 sections, this is the first in that series. In this first section I show you the fundamentals of 3d modeling and design through some more easy examples to get you started modeling from scratch!

In the second section we start modeling for 3d printing, where the designs we model can actually be 3d printed. In the third section we look at design for laser cutting and the interesting constraints you have to deal with when doing so. In the fourth section I teach you how to model parametrically. A very powerful method of 3d modeling which will make you an incredibly efficient and effective 3d modeler.

Each lesson builds upon the knowledge gained by the previous lessons, and by the end of this series you will have enough experience and confidence to start creating your own designs in 3d.

This series of courses is perfect for you if you are interested in 3d printing and/or laser cutting as you will learn how to design for both. The specific factors you need to take into account for both laser cutting and 3d printing are thoroughly discussed, and you will also build your 3d modeling skills needed to realize your ideas.