Lynda – Fusion 360: Designing for Plastics
Lynda – Fusion 360: Designing for Plastics
Plastic has unique properties not shared by other materials, and injection molding has a number of constraints that must be accommodated in the design process. These constraints are different from other manufacturing techniques like 3D printing and subtractive manufacturing. As a result, if you’re designing something that will eventually be created in plastic, considering the complexities of manufacturing in your design process is critical. You’ll need to learn how to do things a bit differently than you would for other materials and processes. In this course, learn how to design for injection molding even when using additive manufacturing to create a prototype in plastic using Fusion 360. Instructor Thom Tremblay explains how to create a form, complete and visualize your design, set it up for 3D printing, all while designing a ready-to-manufacture part.
MP4 1280x720 | 0h 56m | ENG | Project Files | 250 MB
Download links:
http://nitroflare.com/view/4B5806B5A5A729D/Lynda_-_Fusion_360_Designing_for_Plastics.rar
Comments
Add comment
Tags
Archive
« November 2024 » | ||||||
---|---|---|---|---|---|---|
Mon | Tue | Wed | Thu | Fri | Sat | Sun |
1 | 2 | 3 | ||||
4 | 5 | 6 | 7 | 8 | 9 | 10 |
11 | 12 | 13 | 14 | 15 | 16 | 17 |
18 | 19 | 20 | 21 | 22 | 23 | 24 |
25 | 26 | 27 | 28 | 29 | 30 |
Vote
New Daz3D, Poser stuff
New Books, Magazines